Mitsubishi PLC Automatic Fence Mesh Welding Machine For Railway Guard Fence
Main features:
1.The control system adopts synchronous CNC technology, Mitsubishi PLC program and HMI. It is easy and convenient to operate.
2.Longitude wires are fed from wire coils automatically and through precise straight setting equipment.
3.Cross wires should be pre-straightened&pre-cut, then fed from hopper device automatically.
4. The hopper device is controlled by step motor and has high capacity. Falling wire one by one automatically instead of putting wefts wires by manual work, increasing productivity.
5. Adjustable distance of line wire that allows different opening size between the line wire, when input the distance of cross wire to computer, any character can be reach. Welding aperture can adjust randomly within range.
6. Mesh pulling system adopts servo motor, which makes the mesh opening size more accurate.
7. The main engine adopts imported and famous pneumatic components, making the service life long.
8. This machine equips typical and efficient transformer, which gearless adjusted, enlarging the welding range.
9, 140KVA Transformer with water cooling system and separately welding controller.
10, Material:Suitable for low carbon iron wire, deformed bar, round bar black annealed wire or galvanized (cold galvanized, hot galvanized) processing
11, The machine can produce mesh panel.
Technical parameter
| Wire diameter |
2.5--6.0mm |
Line wire form |
From coil |
| Line wire distance |
50mm--300mm |
Weft wire form |
Pre-cut wire |
| Cross wire distance |
50mm--300mm |
Rated voltage |
380V 50HZ(customized) |
| Welding net width |
2500mm |
Rated power |
6X140KVA |
| Welding speed |
40--60 times/min |
mesh Length |
According to your request |
| Welding spots |
51 |
Dimension |
5.9m*3.2m*1.7m |
| Machine weight |
4.6T |
Motor |
5.5KW |
Below machine photos
Mesh cutting machine
Line wire straightening part
Product Tags:
|
|
PLC Control Automatic Fence Mesh Welding Machine For Railway Guard Fence Images
|
